GATE Instrumentation Engineering Practice Quiz

Question 1

A voltmeter has a specified accuracy of ±1% of full-scale reading and a full-scale value of 300 V. If it indicates 150 V, what is the maximum possible percentage error with respect to the indicated reading?

Accepted Answer

±2%

Question 2

The measured value of a resistance is 100 Ω with a possible absolute error of ±0.5 Ω. What is the relative error?

Accepted Answer

0.5%

Question 3

A quantity is computed as Q = x^2 y^3 / z. If the limiting errors in x, y, and z are ±1%, ±2%, and ±1% respectively, what is the maximum limiting error in Q?

Accepted Answer

±9%

Question 4

A moving-coil ammeter has a true current of 10 A flowing, but it indicates 9.8 A due to a constant negative bias. If 100 independent readings are averaged, assuming negligible random error, the average reading will be approximately

Accepted Answer

9.8 A

Question 5

A current I is computed from I = V/R. If the measured voltage has a limiting error of ±2% and the measured resistance has a limiting error of ±1%, what is the maximum limiting error in I?

Accepted Answer

±3%

Paper	Action	File Format
GATE Instrumentation Engineering 2007 2007
GATE Instrumentation Engineering 2008 2008
GATE Instrumentation Engineering 2009 2009
GATE Instrumentation Engineering 2010 2010
GATE Instrumentation Engineering 2011 2011
GATE Instrumentation Engineering 2012 2012
GATE Instrumentation Engineering 2013 2013
GATE Instrumentation Engineering 2014 2014
GATE Instrumentation Engineering 2015 2015
GATE Instrumentation Engineering 2016 2016
GATE Instrumentation Engineering 2017 2017
GATE Instrumentation Engineering 2018 2018
GATE Instrumentation Engineering 2019 2019
GATE Instrumentation Engineering 2020 2020
GATE Instrumentation Engineering 2021 2021
GATE Instrumentation Engineering 2022 2022
GATE Instrumentation Engineering 2023 2023
GATE Instrumentation Engineering 2024 2024