Study in Germany / DAAD entries read 12 October 2026

MS in Mechanical Engineering in Germany with Low CGPA: Programmes and Their Stated Minimum Grades

There is no single CGPA cut-off for Germany. Each programme sets its own admission rules, and some state a minimum grade on the German scale, where 1.0 is best. We read DAAD's database and counted what programmes we tag as Mechanical Engineering (our subject keywords) state.

19 programmes counted6 rules quoted hereFree
19English-taught Mechanical Engineering master's programmes state a plain minimum gradeOur count · DAAD entries
12of them are met with 2.5 or 2.6, the largest bandOur count · DAAD entries
1have a rule that a German grade of 2.7 already meetsOur count · DAAD entries
CGPA 6.5 = 2.7on a 10-point scale with a pass mark of 4KMK formula · our arithmetic

Checked 12 October 2026. Our count: 1,590 English-taught master's entries read; 291 state a grade on the German scale.

01 / Free check

How many programmes does your grade meet?

Use the pass mark your university prints for the whole degree. For percentages enter 100 as the best grade. Full calculator with the working.

German grade 2.7

1

of 19 Mechanical Engineering programmes state a minimum grade you meet. Across all fields: 43 of 218.

A stated minimum is one condition. The university decides admission.

How it counts: your grade is converted with the Modified Bavarian Formula of the KMK agreement (one decimal, not rounded) and compared with the minimum each programme states in its DAAD entry. Programmes that state a grade with a condition are not counted here.

02 / The data

What Mechanical Engineering programmes state

German grade that meets the ruleProgrammesCGPA threshold, pass mark 4CGPA threshold, pass mark 5
3.0 or more lenient0above 5.8 reads 3.0 or betterabove 6.5 reads 3.0 or better
2.7 to 2.91above 6.4 reads 2.7 or betterabove 7 reads 2.7 or better
2.5 or 2.612above 6.8 reads 2.5 or betterabove 7.34 reads 2.5 or better
2.0 to 2.44above 7.8 reads 2.0 or betterabove 8.17 reads 2.0 or better
Better than 2.02above 8 reads 1.9 or betterabove 8.34 reads 1.9 or better

Programme counts are ours, from DAAD entries read 12 October 2026. CGPA figures are our arithmetic with the KMK formula on a 10-point scale, for the strictest grade in each row; the formula cuts to one decimal, so 6.81 already reads 2.5 with a pass mark of 4. A rule worded "better than 2.5" is counted as met from 2.4. A further 8 programmes state a grade with a condition or an alternative and are not in this table.

What a 6 to 7.5 CGPA meets

CGPA (out of 10, pass mark 4)German gradeMechanical Engineering programmes whose stated minimum it meets
63.00 of 19
6.52.71 of 19
72.513 of 19
7.52.215 of 19

03 / Free list

The 6 most lenient Mechanical Engineering programmes

The rule is quoted from the programme's DAAD entry. Open the entry before you rely on it.

ProgrammeStated minimumThe rule, as writtenSource
Triple Master's Degree — Mechanics of Sustainable Materials and Structures (MS²)
TU Dortmund University, Dortmund
2.8“an equivalent grade of up to 2.8 (“good”) in the German grading system.”DAAD entry
Additive Manufacturing
Paderborn University, Paderborn
2.5“University studies equivalent to a three-year German Bachelor's degree, final grade 2.5 minimum”DAAD entry
Artificial Intelligence Aided Mobility Design (MA)
Hof University of Applied Sciences, Selb
2.5“minimum grade 2.5 according to the German grading system”DAAD entry
Autonomous Systems (MSc)
Hochschule Bonn-Rhein-Sieg, Sankt Augustin
2.5“a grade point average (GPA) of 2.5 or better on the German grading scale (1=excellent to 5=fail) is necessary.”DAAD entry
Biomechanical Engineering (BiME)
Otto von Guericke University Magdeburg, Magdeburg
2.5“Adequate Bachelor's degree with at least 180 CP and a minimum average grade of 2.5 (as averaged result of all provided examination performances)”DAAD entry
Control, Computer and Communications Engineering (CCCE)
Technische Hochschule Mittelhessen University of Applied Sciences, Friedberg (Hessen)
2.5“(equivalent to) at least 2.5 according to the German grading system”DAAD entry

Ordered by the stated grade, most lenient first. The order is by stated grade only; it is not a quality ranking. 13 more Mechanical Engineering programmes state a stricter minimum; the paid report matches all of them to your grade.

04 / Before you trust another page

Where other pages get low-CGPA advice wrong

Still printed elsewhereWhat the entries show
"German public universities need 7 or 7.5 CGPA."There is no national cut-off. Each programme sets its own rule. Of the 1,590 English-taught master's entries we read, 291 state a grade on the German scale; the rest do not state a German-scale grade in the entry.
"Below a German 2.5 you cannot apply."1 of the 19 Mechanical Engineering programmes with a plain minimum have a rule that a German grade of 2.7 already meets (some are more lenient still).
"These universities accept 6 CGPA."A programme states a minimum grade; it does not promise a place. Programmes may also assess your subject, credits, language and documents and, where their rules provide for it, rank eligible applicants.
"Every programme is tuition-free."13 of the 19 list no tuition fee in their DAAD entry. A semester contribution may still apply; check the programme page.
"Use one CGPA chart for India."The grade depends on three numbers from your own transcript: your grade, the best grade and the pass mark.

Counts are ours, from DAAD entries read 12 October 2026.

Low CGPA FAQs

Can I do a Mechanical Engineering master's in Germany with 6.5 CGPA?

With a pass mark of 4, CGPA 6.5 on a 10-point scale converts to a German grade of 2.7. 1 of the 19 Mechanical Engineering programmes in our list state a minimum grade that this meets. Meeting it is one condition; the university decides admission.

What German grade is 6 CGPA and 7 CGPA?

By the KMK Modified Bavarian Formula, with a best grade of 10 and a pass mark of 4: CGPA 6 is 3.0 and CGPA 7 is 2.5. With a pass mark of 5 the results are 3.4 and 2.8.

Which minimum grade do most programmes state?

Around 2.5. In our list 12 of 19 Mechanical Engineering programmes are met with a German grade of 2.5 or 2.6. On a 10-point scale with a pass mark of 4, any CGPA above 6.8 reads 2.5 or better (our arithmetic with the KMK formula).

Where does this list come from?

From DAAD's International Programmes database, read on 12 October 2026. We kept an English-taught master's programme only if its entry states a grade on the German scale and two independent readings agreed on that grade from the same quoted sentence. The extraction is automated and can contain errors, so every row links to its entry.

A programme I like is not in the list. Why?

It may not be included because its DAAD entry states no grade on the German scale, because it states a grade only with a condition or an alternative, because it is taught in German, or because it is not a master's programme. No grade in the entry does not mean no grade rule: open the programme page and its admission regulations.

Does the university use the grade from this page?

No. The university, or uni-assist for it, works out the grade used in your application from your documents and may use different best and passing grades. The university decides admission. Use this as a planning figure.

Sources

What we could not find

  • A grade rule for programmes whose DAAD entry states no German-scale grade. Most entries state none; the rule may be in the university's admission regulations.
  • ECTS and subject-credit rules in a comparable form. They are written differently in every entry, so we do not tabulate them.
  • A public or private flag for each university. We list the tuition each entry states.
  • Admission numbers or the grade of the last admitted applicant. DAAD entries do not give them.

This page is a planning aid by ProSyllabus, not a German university or DAAD page. Entries change; the date above is when we last read them. It does not decide admission.

Related