Distance learning / Every component counts
Your marks.
The full picture.
Calculate a course percentage, see which marks are still missing and work back from your next target. Keep the calculation and the official completion rules clear.
Independent planning calculator. Confirm your programme, course and session rules. An average does not establish a pass, award division or prove degree completion. No enrolment number or login is needed. Open the official IGNOU grade card portal to check official status.
01 / Read your programme guide first
Make the rules visible
Choose a method for each course below. Custom weights apply only to rows labelled custom. Enter minima only when confirmed in your guide; leave them blank if unknown. The same minima apply across this batch—use a separate calculation for courses with different minimum rules.
For custom two-component rows only
The two custom weights must total 100%
Neither option is an automatic official degree rule.
Blank means not checked; applies to paired rows
Blank means not checked; applies to paired rows
Single final score rows only; no component checks
The 40% example reflects the PGCGI guide’s component rule, not a default for every programme. The guide also gives theory and laboratory courses different weights.
02 / Enter the marks, not weighted contributions
IGNOU course percentage calculator
Use raw component marks and the actual maximum. In paired rows, the first component is continuous assessment and the second is term-end evaluation. Practical records and practical examinations can use these fields when their guide defines a two-component calculation. Use single final score only for a verified already-combined numerical course mark.
Continuous assessment
Blank = pending; 0 = actual zero
Before component weighting
Term-end evaluation
Blank = pending; 0 = actual zero
Actual maximum for this score
Average of entered course percentages
66.00%Course weight covered: 1 of 1 planned. Failed components are retained in the arithmetic average when all marks are present.
This is a planning average of the entries, not official final programme percentage or completion. Blank minima mean checks are incomplete; verify additional programme requirements separately.
03 / Work back from a course target
What term-end mark would reach your target?
Use a known continuous assessment result. The planner applies the selected weights and the term-end minimum above, if entered. It also flags a known assessment result below its entered minimum.
Raw known assessment score
A personal target, not an official pass rule
Required term-end score under these settings
51.4286 / 100 raw term-end marks (51.4286%). If only whole marks are possible, aim for at least 52 marks.
Highest course percentage with full term-end marks: 94.0000%. The target alone needs 51.4286% in term-end evaluation; the recommended score also respects an entered term-end minimum.
Component minima are not fully entered. This is a target calculation, not a pass check.
Keep full precision when comparing to a threshold. Displayed values are rounded; official marking increments and rounding rules may differ.
How the percentage calculation works
Normalize each score
Divide earned marks by that component’s maximum. 40 out of 50 is 0.80, or 80%. The maximum is essential; 40 out of 100 is a different result.
Apply the weights once
Multiply each normalized component by its percentage weight. For 30/70, 80% × 30% contributes 24 percentage points. 60% × 70% contributes 42.
Check the components
The sum is the course percentage. Minimum checks are separate. A combined 66% does not establish official completion if any required component or other condition is unmet.
Formula: (assessment marks ÷ assessment maximum × assessment weight) + (term-end marks ÷ term-end maximum × term-end weight). The two weights must total 100%. A single final mark uses earned ÷ maximum × 100.
Worked examples: the same marks, different questions
30/70 course: 66%
Assessment 80/100 and term-end 60/100: (80 ÷ 100 × 30) + (60 ÷ 100 × 70) = 24 + 42 = 66%.
For maxima of 50 and 70, assessment 40/50 and term-end 42/70 give the same result. Enter raw marks with those maxima.
A high total can still miss a minimum
Assessment 90/100 and term-end 30/100 at 30/70: 27 + 21 = 48%. With an entered 40% minimum in each component, term-end is below the minimum.
The calculator retains 48% in an arithmetic average but flags the component. It does not mark the course as officially completed.
70/30 changes the result
Continuous assessment 80/100 and term-end 60/100 at 70/30 gives 56 + 18 = 74%. Applying 30/70 instead would give 66%.
The PGCGI guide demonstrates why laboratory and theory weights must be checked separately. A programme label alone is insufficient.
Credits change the average
Course percentages 66% over 4 credits and 80% over 2 credits have an equal-course average of 73%. With credit weighting, (66 × 4 + 80 × 2) ÷ 6 = 70.67%.
Select only the method required for your purpose. Neither number automatically becomes your official programme percentage.
Read the grade card before copying numbers
Check the course code, session and whether each result is numeric, pending, absent or withheld. Match each field to the programme guide’s evaluation component. A term-end result and a course’s combined final result answer different questions.
If the displayed number has already been weighted, applying the weight again understates its contribution. This calculator expects raw component marks and their original maxima. For an already-combined mark, use single final score instead.
If a course has several assignments, practical exercises or viva components, first obtain the combined component value required by its guide. This page does not decide how those subcomponents combine. More than two separately weighted components should be calculated under their actual full formula rather than forced into a two-component example.
Pending results and incomplete coverage
A missing required component leaves the whole course percentage pending. The calculator shows its planned course or credit weight, but does not invent a result or replace it with zero. When only some courses are calculable, the average is explicitly partial.
Adding a course with blank marks therefore increases the planned coverage without lowering the known-course average. That is a progress view, not a final percentage. Do not use a favourable partial average as a completed-programme result.
Known components below an entered minimum remain flagged even while another component is pending. Courses with all marks present remain in the average regardless of that flag. There is no exclusion switch that can silently remove a failed course.
Practical, project and final-score limits
Use the 70/30 option only when the guide specifies that distribution. It is an example, not a universal practical rule. For a project or standalone numerical final mark, the single final score mode preserves the score’s own maximum.
Single-score mode cannot reconstruct the underlying practical record, attendance, viva, project approval or separate component passes. If your guide requires those, check them against official status. A final-score minimum entered here only checks that numerical score.
This page does not issue an IGNOU marksheet, division, certificate or CGPA conversion. Keep the original grade card and the programme’s evaluation instructions beside any planning calculation.
Before using an aggregate in an application
- List every required course and confirm the results are complete.
- Read the application’s instructions and your programme’s aggregation rule.
- Confirm component maxima and weights; avoid weighting a contribution twice.
- Check separate component minimum rules and official course completion status.
- Choose the correct aggregate method and credits, if applicable.
- Use full precision, then apply the required rounding rule.
- Keep the downloadable breakdown as a calculation record, alongside official documents.
Questions learners ask
IGNOU percentage FAQs
How do I calculate an IGNOU course percentage?
Use the component weights in your programme guide. Normalize each component as marks earned divided by its maximum, then multiply by its percentage weight and add the contributions. For a 30/70 example, 80 out of 100 in assessment and 60 out of 100 in the exam gives 24 + 42 = 66%.
Is the 30% assignment and 70% exam rule universal?
No. The official PGCGI guide uses 30/70 for theory and 70/30 for continuous practical assessment and term-end practical evaluation. Confirm your exact programme, course and session before choosing a method. The calculator offers examples and custom weights, not automatic programme rules.
Can a high assignment mark compensate for a failed exam?
A weighted percentage alone cannot establish that. When your programme requires each component to pass separately, each must meet its own minimum. Enter the confirmed component minima to check them. A course can have a high combined percentage and still fall below a component minimum.
Are the pass marks always 35% or 40%?
Do not assume a universal threshold from the degree level. Check your programme guide and current notifications. This tool leaves the minima blank initially; it does not label a course as meeting component minima until the required thresholds are entered.
What happens if assignment or exam marks are missing?
Leave the marks field blank. A course with missing required marks is pending and has no calculated percentage. Its course count and planned aggregate weight remain visible. The displayed average covers only calculable courses and is not a final programme percentage.
Should I enter zero for a pending result?
No. Zero is an actual numerical score and participates in calculation and minimum checks. A blank marks field means the result is missing. Absent, withheld and incomplete statuses require their official treatment; this calculator does not decide it.
Can I use marks out of 50 or 70?
Yes. Enter the actual maximum for each component. For example, 40 out of 50 becomes 80%, and 42 out of 70 becomes 60%. Do not apply the component weight twice to marks that are already weighted contributions.
How should practical or project marks be included?
If the course has two assessed components, use their verified weights and component scores. If you have an already-combined final numerical course mark, choose the single final score method. That mode checks only the entered final-score minimum and cannot verify underlying component passes, attendance, viva or project acceptance.
Is a simple average or credit-weighted average correct?
Use the aggregate rule required by your programme or the receiving application. Equal-course averaging gives every course the same influence. Credit weighting uses the credits you enter. This tool offers both as explicit planning methods and does not claim either is a universal IGNOU degree formula.
Can I convert IGNOU CGPA or letter grades into percentage here?
This calculator uses numerical marks and known maxima. It does not assume a CGPA multiplier or convert a letter grade into an exact percentage. Use a programme-specific official conversion rule if one is required.
Does the result prove I have passed or completed my degree?
No. The result is a calculation from the scores, methods and minima you entered. Official completion can depend on component status, required courses and credits, practicals, projects and other conditions. Check the official grade card and programme rules.
Are my marks saved or sent to IGNOU?
The entries remain in this page’s memory and are not submitted to an IGNOU portal or a ProSyllabus marks database. Reloading resets them. Usual site analytics still apply. A CSV you download contains your entered marks, settings and results; keep it private if it identifies you.
Sources and scope
Checked 9 October 2026. The calculation formulas are transparent arithmetic, with weights and thresholds chosen by the user. The source example establishes that component rules vary; it is not a complete catalogue of IGNOU programmes.
- Official PGCGI programme guide, evaluation section (pages 24–25) — theory 30/70, laboratory 70/30 and separate component minima. Confirm later notifications for your session.
- Official IGNOU grade card portal — verify actual course status and reported marks.
- IGNOU official website — find your programme guide and current notices.
Independent ProSyllabus tool; no endorsement by or affiliation with IGNOU.