Red Seal Millwright Practice Exam: Industrial Mechanic Mocks (Independent)
2 full timed mocks of 135 questions in 4 hours, the question count and writing time Red Seal publishes for the Industrial Mechanic (Millwright) exam. Each mock has exactly the published number of questions for every task, every answer is explained against the sub-task it tests, and the calculations use the formula sheet Red Seal supplies with the exam where it applies, plus standard trade relationships, with every step shown in the answer. Start with the 4 free questions below.
- 2timed mocks
- 135questions each
- 4 heach
- 4free
Start with the free sample
The 4 free questions, from rigging, shaft alignment, hydraulics and vibration analysis, run in the same test player as the mocks. Each mock is 135 questions in 4 hours, with the tasks mixed. Red Seal's pass mark for the real exam is 70%. Use your practice results to see which tasks to study.
Double-checked questions Real exam pattern Free sample · 4 questions
Red Seal Millwright Practice Exam · Free sample
Free sampleInstant score, answer review and weak-topic diagnosis
Red Seal Millwright Practice Exam · Mock exam 1
Instant score, answer review and weak-topic diagnosis
Red Seal Millwright Practice Exam · Mock exam 2
Instant score, answer review and weak-topic diagnosis
What is inside
| Major Work Activity | What the questions practise | Per mock |
|---|---|---|
| A. Performs common occupational skills | Safety and lock-out, tools and shop machines, lubrication, levelling, fasteners, materials and heat treatment, drawings, communication and mentoring, measuring and layout, cutting and welding. | 25 |
| B. Performs rigging, hoisting/lifting and moving | Load weights, sling angles and stress, wire rope, chain and synthetic slings, hardware, hoists, jacking and moving. | 17 |
| C. Services mechanical power transmission components and systems | Prime movers, shafts, bearings and seals, couplings, clutches and brakes, chain and belt drives, gears, and shaft alignment. | 32 |
| D. Services material handling / process systems | Robotics, fans and blowers, pumps, compressors, process piping, tanks and containers, and conveying systems. | 24 |
| E. Services fluid power systems | Hydraulic systems, and pneumatic and vacuum systems. | 21 |
| F. Performs preventative and predictive maintenance, commissioning and decommissioning | Vibration analysis, balancing, NDT, fluid analysis, condition monitoring, commissioning and decommissioning. | 16 |
| Total | 2 mocks of 135, plus the free sample of 4 | 135 |
The counts per Major Work Activity, and the counts per task inside them, are the ones Red Seal publishes for this exam. Each question has four options and one correct answer, and each explanation names the sub-task of the occupational standard it was written to.
Not included
- questions from Red Seal's own sample questions or the real exam
- diagram-based questions: our questions are text only (Red Seal supplies a diagram booklet if one is required)
- anything based on the newer occupational standard: Red Seal says exams based on it are still being developed, so these mocks follow the standard the current exams use
What you see after every mock
- Your score out of 135 and your score in each Major Work Activity, so you can see where you lose the most marks.
- Your time per question, against a clock of 4 hours for 135 questions.
- The reason behind every answer, with the sub-task of the occupational standard it tests.
A score here is your score on our questions. It is not a Red Seal result and does not predict one.
The exam, as Red Seal describes it
- The Red Seal Industrial Mechanic (Millwright) exam has 135 questions, set out by Major Work Activity and task in Red Seal's exam breakdown.
- Every question is multiple choice, with four options and exactly one correct answer, and each is worth one mark.
- The writing time is four hours and the pass mark is 70%.
- A formula sheet and an acronym list are supplied with the exam, and a calculator is provided if you need one.
- Red Seal exams are administered by the provincial and territorial apprenticeship and certification authorities, which also decide who may write them.
Sources: Red Seal, Industrial Mechanic (Millwright) - Exam Information, Red Seal Exam Preparation Guide and the Industrial Mechanic (Millwright) trade page, read on 25 October 2026. Red Seal and your apprenticeship authority are the authority on the exam: check their pages before you book.
Before you buy
Are these the real Red Seal questions?
No. Every question is our own, written to the sub-tasks of the Red Seal Occupational Standard. None comes from Red Seal's sample questions or the real exam, and Red Seal says questions on a practice test developed by an outside source are very unlikely to be similar to those on the Red Seal exam.
Is this made or recommended by Red Seal?
No. It is independent practice by ProSyllabus. Red Seal does not endorse any test preparation company. Its sample questions, self-assessment and preparation guide are worth using alongside this.
Will this make me pass?
We do not claim that it will. It gives you full-length timed practice with Red Seal's published question count, time and task weighting, your score by Major Work Activity on our questions and the reason behind every answer, so you can see what to study.
Which exam is this for?
The Red Seal exam for Industrial Mechanic (Millwright), the trade some provinces and territories call Industrial Mechanic Millwright, Millwright – Industrial Mechanic or Industrial Mechanic. It follows the occupational standard the current exams are based on.
What do I get?
2 mocks of 135 questions with a 4-hour clock, in the full test player with a question palette and mark for review. After each mock: your score by Major Work Activity, your time per question and the explanation of every answer. Retake either mock as often as you like.
How do I pay and get access?
One payment by card (or PayPal where offered), handled by our payment provider. In Canada the price is charged in Canadian dollars; in the United States, the United Kingdom and the euro area in your own currency; elsewhere in your own currency where we support it, otherwise in Indian rupees with the local figure shown as an estimate. Access opens on this device straight after payment. Sign in afterwards to keep it on your account. Purchase policy.
Independent practice material by ProSyllabus. Not the official Red Seal exam, and not made or endorsed by the Red Seal Program or any province or territory. These are our own questions. Exam facts come from red-seal.ca, read on 25 October 2026.