Checked 18 November 2026. Hours, windows and exam lengths are LIBF’s, from its CeMAP page, the CeMAP specification (Published April 2026; version 14) and the FSRE specification (Published July 2026), read 18 November 2026. Weekly plans are our arithmetic.
CeMAP takes about 250 hours of study: that is LIBF’s Total Qualification Time, its prediction for a student with no prior knowledge. At 10 hours a week that is about 25 weeks, roughly six months; at 20 hours a week, about 13 weeks. LIBF’s separate figure for CeMAP 1 (the Financial Services, Regulation and Ethics module) is 100 hours. If you register for the full qualification you have 18 months to finish; module by module, 12 months for each. The five exams add up to 6 hours.
ProSyllabus is an independent study site, not connected with LIBF or Walbrook Institute London. The hours, time limits and exam lengths below are LIBF’s, from its CeMAP page and specifications read on 18 November 2026; the weekly plans are our arithmetic and suggestions.
LIBF CeMAP and FSRE specifications and CeMAP page, read 18 November 2026.
Study hours, module by module
| Module | Units | LIBF study hours | Exam time |
|---|---|---|---|
| CeMAP 1: Financial Services, Regulation and Ethics (FSRE) | FRE1, FRE2 | 100 hours (TQT in the FSRE specification) | 1 hour per unit |
| CeMAP 2: Mortgages (MORT) | MRT1, MRT2 | Not stated separately | 1 hour per unit |
| CeMAP 3: Assessment of Mortgage Advice Knowledge (ASEW/ASSC) | One unit | Not stated separately | 2 hours |
| The whole CeMAP qualification | Five units | 250 hours (TQT in the CeMAP specification) | 6 hours in all |
Sources: CeMAP specification (TQT 250 hours), FSRE specification (TQT 100 hours), LIBF CeMAP page (exam lengths), read 18 November 2026.
LIBF defines Total Qualification Time as “a prediction of the total time a student with no prior knowledge might need to complete the course”. It has two parts: guided learning, study under direct teacher supervision including supervised exams, and all other hours, which include unsupervised study, e-learning, exam preparation and formal assessments. LIBF describes CeMAP as “primarily considered as a distance learning qualification”, and its CeMAP page says each unit’s exam can be taken at any time with no booking. On our reading, that is why almost all of its hours are “other” hours.
The LIBF documents we read give no separate figure for CeMAP 2 or CeMAP 3. Taking FSRE’s 100 hours from CeMAP’s 250 leaves 150 hours for the other two modules together; that subtraction is ours. What each unit covers is on our CeMAP modules and units guide.
See what the first module asks before you plan it. Three free questions from our own CeMAP 1 mock:
FreeTests: Financial markets and the economy · Advice skills · Regulatory principles
CeMAP 1 Mock Exam: free sample
Answer 3 questions against the clock, like the real exam. You then see the right answer, the reason and your time on each. About 5 minutes · free · no sign-in.
3 questions to answer▶ Start nowThis one is free · no sign-in neededYour result shows how long each question took you.How many weeks at your pace
| Hours a week | Weeks for 250 hours | About how many months | Inside LIBF’s 18 months? |
|---|---|---|---|
| 5 | 50 | 11 | Yes |
| 8 | 32 | 7 | Yes |
| 10 | 25 | 6 | Yes |
| 15 | 17 | 4 | Yes |
| 20 | 13 | 3 | Yes |
Our arithmetic: LIBF’s Total Qualification Time of 250 hours (CeMAP specification, read 18 November 2026) divided by hours a week, rounded up to whole weeks.
Relevant prior knowledge may change this. LIBF’s figure is for a student with none; on our reading, someone who already works in financial services may need fewer hours. LIBF also says that if you hold qualifications from it or another awarding body, you may be eligible to apply for recognition of prior learning.
- CeMAP 1: both FSRE units
- CeMAP 2: MRT1 and MRT2
- CeMAP 3: six case studies
- Every answer explained
Your week-by-week plan
Without JavaScript, use this worked example at 10 hours a week, starting in week 1; for other paces, divide each module’s hours by your hours a week and round each module up to whole weeks separately (which can make the plan a week or two longer than rounding 250 hours once, as the pace table does). The CeMAP 1 hours are LIBF’s FSRE figure; the CeMAP 2 and 3 split of the remaining 150 hours is our assumption, weighted towards CeMAP 2 because it has two unit exams and CeMAP 3 one.
| Weeks | Module | Hours at 10 a week | Exams at the end |
|---|---|---|---|
| 1 to 10 | CeMAP 1 (FRE1, FRE2) | 100 (LIBF’s FSRE figure) | FRE1 and FRE2, one hour each |
| 11 to 20 | CeMAP 2 (MRT1, MRT2) | 100 (our split) | MRT1 and MRT2, one hour each |
| 21 to 25 | CeMAP 3 (case studies) | 50 (our split) | ASEW/ASSC, two hours |
What a 10-hour week can look like (our suggestion)
- Three weekday evenings of about two hours each with LIBF’s learning materials for the module, one topic at a time.
- A longer weekend session of about three hours to go back over the week’s topics and write short notes in your own words.
- About an hour of questions on the week’s topics, timed, then a re-read of the explanations for anything you got wrong.
- In the last week of each module, one full timed mock in the exam’s length instead of new reading, then a final look at your weakest topics.
- If a week is lost to work or family, add it to the end of the plan instead of doubling up the next week, and re-check the planner against LIBF’s window.
Our suggestion for spreading the hours, not LIBF’s; it adds up to about ten hours a week.
Why this order
LIBF says there is no required order, but recommends CeMAP 2 before CeMAP 3, because CeMAP 3 “focuses on applying knowledge” from the first two modules. It notes that many learners go CeMAP 1, 2, 3, and that some start with CeMAP 2 because it is more practical. If you want to start advising soon, our reading is that CeMAP 1 first matters: for advice on regulated mortgage contracts for a non-business purpose, the FCA rules (TC 2.1.6) require the relevant regulatory module of a listed qualification before you advise, and CeMAP 1 is LIBF’s regulation and ethics module (see our how to become a mortgage adviser guide).
FreeTests: Financial markets and the economy · Advice skills · Regulatory principles
CeMAP 1 Mock Exam: free sample
Answer 3 questions against the clock, like the real exam. You then see the right answer, the reason and your time on each. About 5 minutes · free · no sign-in.
3 questions to answer▶ Start nowThis one is free · no sign-in neededYour result shows how long each question took you.Time limits, exams and resits
- Registration window: 18 months for the full qualification, or 12 months for each module registered separately (CeMAP specification and LIBF page).
- Booking: each unit is an online multiple-choice exam you take on LIBF’s learning platform at any time, with remote invigilation and no booking required (LIBF page).
- Exam lengths: FRE1, FRE2, MRT1 and MRT2 are one hour each; CeMAP 3 is a two-hour exam with six case studies (LIBF page).
- Resits: for each unit you fail, LIBF restricts you to three exam attempts in a week and ten in any 12-month period, subject to a resit fee (CeMAP specification). The fee is on our CeMAP cost guide.
LIBF CeMAP specification and CeMAP page, read 18 November 2026.
A failed unit costs time as well as a fee. Our suggestion: plan to sit each exam once you are scoring comfortably above the pass mark in practice. The mark you need is on our CeMAP pass mark guide and the resit fee on the CeMAP cost guide.
What speeds CeMAP up or slows it down
- Faster (LIBF): exams on demand, so you can sit a unit as soon as you are ready instead of waiting for a date.
- Possible time saving (our view): an exemption granted through LIBF’s recognition of prior learning process may reduce what you need to complete.
- Slower (our view): starting CeMAP 3 before CeMAP 2; LIBF recommends the other way round.
- Slower (our view): long gaps between modules, which risk running into the registration window.
- Our suggestion: a timed mock in the current format near the end of each module, to check your pace before you sit the real exam.
Facts marked LIBF are from its page and specification; the rest is our view.
For that last step, our own CeMAP 1, 2 and 3 mock bundle holds three mocks: CeMAP 1 (FRE1 and FRE2, 40 questions each in one hour), CeMAP 2 (MRT1 with 50 questions and MRT2 with 40, one hour each) and CeMAP 3 (six case studies with ten questions each, two hours). It is independent practice, not LIBF material. See also our CeMAP 1 mock exam guide and CeMAP 2 mock exam guide.
Start the clock with CeMAP 1:
FreeTests: Financial markets and the economy · Advice skills · Regulatory principles
CeMAP 1 Mock Exam: free sample
Answer 3 questions against the clock, like the real exam. You then see the right answer, the reason and your time on each. About 5 minutes · free · no sign-in.
3 questions to answer▶ Start nowThis one is free · no sign-in neededYour result shows how long each question took you.Frequently asked questions
How long does CeMAP take?
LIBF predicts 250 hours of Total Qualification Time for a student with no prior knowledge. At 10 hours a week that is about 25 weeks, roughly six months. You have 18 months if you register for the full qualification.
Can you do CeMAP in 3 months?
At 20 hours a week, LIBF’s 250 hours take about 13 weeks, so roughly three months is possible at that pace by our arithmetic; on our reading, relevant prior knowledge may reduce the hours. Each exam can be taken on demand, with no booking.
How long does CeMAP 1 take?
LIBF’s Total Qualification Time for FSRE, which is CeMAP 1, is 100 hours. Its two unit exams, FRE1 and FRE2, are one hour each.
How many hours a week should I study for CeMAP?
The LIBF documents we read set no weekly figure. By our arithmetic, 10 hours a week covers its 250 hours in about 25 weeks and 5 hours a week in about 50 weeks, both inside the 18-month window.
Is there a time limit to complete CeMAP?
Yes. LIBF gives 18 months if you register for the full qualification, or 12 months for each module registered separately.
How long are the CeMAP exams?
FRE1, FRE2, MRT1 and MRT2 are one hour each; CeMAP 3 is two hours. That is six hours of exams in all.
Do I have to take the CeMAP modules in order?
No. LIBF says there is no required order, but recommends CeMAP 2 before CeMAP 3. Many learners go CeMAP 1, 2, 3.
More on CeMAP: how to become a mortgage adviser, is CeMAP worth it, modules and units, the pass mark and the cost.
Sources
- official — LIBF: CeMAP qualification specification (Published April 2026; version 14): Total Qualification Time, registration periods, exam attempts
- official — LIBF: Financial Services, Regulation and Ethics (FSRE) specification (Published July 2026): Total Qualification Time
- official — LIBF: CeMAP qualification page (modules, exam lengths, registration periods, study order)
official = a document published by the conducting body. reported = a news or coaching site we could not check against an original. Where sources disagree this page says so rather than picking one.
